How To Know If The Clutch On A Top-Loading Washing Machine Is Broken

How to Detect a Broken Clutch in a Top-Loading Washing Machine


A top-loading washing machine is a crucial household appliance, but a malfunction can disrupt your routine. One common issue is a broken clutch, which controls the movement of the internal tub and agitator during the wash cycle. Similar to a manual car transmission, regular use can cause wear and damage to the clutch. To fix this, it’s best to seek assistance from a professional washer repair technician with the experience and tools needed to diagnose and replace the faulty component. Alternatively, you can also check for signs of a broken clutch by observing the machine’s actions.

Step 1: Begin the washing cycle on the machine without adding any clothes.

Step 2: Observe the machine’s filling process. Wait until the tub is completely filled.

Step 3: Listen for the sound of the agitator during the wash cycle. If there is no movement noise, it may indicate a broken or damaged clutch.

Step 4: Let the cycle finish. After the water has drained, listen for the sound of the tub spinning rapidly. If the tub does not rotate, it may mean the clutch is broken.

Step 5: Listen for any variations in the spin cycle, such as slowing or changes in the motor humming. These could indicate a broken or worn clutch.

Step 6: If you hear squeaking from the tub during the wash or spin cycle, it’s a sign that there may be an issue with the machine, possibly a broken clutch.

Useful Tips:

Diagnosing clutch issues can be difficult. Minor problems with the clutch may not show visible signs. However, if clothes remain wet after the spin cycle is finished, it could signify an impending clutch failure. This is because the spin cycle may not have enough power to remove all of the water from the clothes.

A Word of Caution:

When checking the machine or troubleshooting, do not hold down the lid switch. It may make it easier to identify the issue, but it can also put you at risk of injury from moving internal parts.

How do I know if my washing machine clutch is broken?

There are a few signs that may indicate a broken washing machine clutch:

  • If the drum of the washing machine does not spin during the wash cycle, the clutch may be broken.
  • If the drum spins but is making a loud grinding noise, the clutch may be worn out.
  • If the drum does not agitate during the wash cycle, the clutch may be broken.
  • If the machine is making a burning smell, the clutch may be overheating.
  • It is best to contact a professional for repair service if you suspect that your washing machine clutch is broken.

How do you test a washer clutch?

To test a washing machine clutch, you will need to perform the following steps:

  1. Unplug the washing machine from the electrical outlet.
  2. Locate the clutch assembly, which is usually located near the base of the washing machine’s transmission.
  3. Use a socket wrench to remove the bolt that holds the clutch assembly in place.
  4. Remove the clutch assembly and inspect it for any visible signs of damage, such as cracked or worn parts.
  5. Rotate the inner drum of the clutch assembly by hand. If it spins freely and smoothly, the clutch is likely functioning properly. If it feels rough or stiff, the clutch may be worn out or damaged.
  6. If the clutch is damaged, it will need to be replaced.

Note: If you are not comfortable or familiar with appliance repair, it is best to contact a professional for repair service. Incorrectly testing or handling the clutch can cause further damage to the appliance or even cause injury.

What is the most common defect of clutch?

The most common defect of a washing machine clutch is wear and tear. Over time, the friction material on the clutch assembly can become worn, reducing its ability to grip and engage the transmission. This can cause the drum to spin poorly or not at all, or cause the machine to make loud grinding noises. Additionally, the clutch spring can lose its tension, resulting in the clutch failing to engage the transmission.

Another common defect is damage to the clutch assembly caused by a foreign object getting into the drum, such as a coin or a small rock, which can cause the clutch to seize or bind. And also rusting or corrosion can also cause damage to the clutch.

It’s important to note that if you suspect your clutch is defective, it is best to contact a professional for repair service as it may cause further damage if not handled correctly.

How do you fix a washing machine clutch?

To fix a washing machine clutch, you will need to replace the clutch assembly. The specific steps to replace the clutch will vary depending on the make and model of your washing machine, but in general, the process will involve the following steps:

  1. Unplug the washing machine from the electrical outlet.
  2. Locate the clutch assembly, which is usually located near the base of the washing machine’s transmission.
  3. Use a socket wrench to remove the bolt that holds the clutch assembly in place.
  4. Remove the clutch assembly and inspect it for any visible signs of damage, such as cracked or worn parts.
  5. Compare the old clutch assembly with a new one to ensure that you have the correct replacement part.
  6. Install the new clutch assembly and tighten the bolt that holds it in place.
  7. Reassemble the washing machine and test it to make sure that the drum spins properly and that the machine is operating smoothly.

If you are not comfortable or familiar with appliance repair, it is best to contact a professional for repair service. Incorrectly handling or installing the clutch can cause further damage to the appliance or even cause injury.

How much does it cost to replace a clutch on a washing machine?

The cost to replace a clutch on a washing machine can vary depending on several factors, such as the make and model of the washing machine, the cost of the replacement clutch, and the cost of labor.

In general, you can expect to pay anywhere from $100 to $300 to replace a clutch on a washing machine. This may include the cost of the replacement clutch, as well as labor costs for the repair.

However, it’s important to note that the cost can be higher or lower depending on the specific washing machine brand and model. Furthermore, if the problem is not just the clutch but also other issues, the cost will be higher. It is best to get a quote from a professional repair service to get a more accurate estimate for the cost of the repair.

Here are the main cities that our highly experienced service techs service in Broward County:

Lauderdale Lakes, Plantation, Cooper City, Fort Lauderdale, Parkland, Hollywood, Margate, Coral Springs, Weston, Miramar, Lighthouse Point, North Lauderdale, Deerfield Beach, Coconut Creek, Sunrise, Dania, Pompano Beach, Pembroke Pines, Davie, Lauderhill, Tamarac, Hallandale, Oakland Park

 

Fixing Dryer Heating Element Failure For Clothes Dryer Not Heating And Gas Dryer Not Drying Clothes
How To Fix Washer That Won't Drain By Cleaning The Drain Pump Filter
Touch to Call!