Having a refrigerator not turning on can be a horrifying experience for homeowners in Coral Springs, Florida. When you have a refrigerator not starting, there is a high risk of food items getting contaminated inside the refrigerator. If your refrigerator does not start, you must check for possible problem with the power supply. At times, a small problem with the plug or the switch can prevent the machine from starting. If there is no problem with the power supply, then you must check the parts that could be responsible for the problem.
Some things you should check include:
Refrigerator Repairs for Overload Relay If Refrigerator Compressor Tries To Start But Wont
Your whirlpool refrigerator won’t turn on if the fan of your machine is running but the compressor does not start. It’s a common problem with different brands including frigidaire refrigerator compressor not running. When a fridge won’t start it could be because of a problem in the overload relay. The relay is the protection device used by the machine to start the winding in the machine circuit until the compressor of your refrigerator is at running speed.
The overload rely is usually a combined part that plugs onto the side of the compressor. You can check the continuity of the overload rely using the multi-meter. Most overload relays come with a capacitor that provides a high start voltage required by compressor winding. If there is a problem with the capacitor, the machine will not start. If you notice any signs of arcing or overheating on the relay or starting capacitor, replace the part immediately following correct installation instructions for proper appliance repair. You get a properly fixed refrigerator or compressor circuit with experts that do correct refrigerator troubleshooting and are experienced in working with thousands of models of home appliances.
Defective Cold Control – Get Refrigerator Repair Service Coral Springs, FL
It is a temperature controlled switch which supplies power to the fan circuit and the compressor, so if not working refrigerator does not turn on. If the machine does not start and the fans are not running, it means that the cold control may be defective. The refrigerator won’t start if that part has problems preventing it from functioning. The cold control is attached to the temperature adjustment knob, which is located in the fresh food section of the machine. To fix the problem if a refrigerator will not turn on, you can check the continuity of the cold control using a multi-meter. Before checking the continuity, make sure you disconnect the power supply to the machine. If you did a search for the term my refrigerator is not turning on, you will also get advice to remove the cold control from the house and disconnect the wires that are attached to the terminals. You must check the continuity between the terminals using a multi-meter. If there is no continuity, you must replace the control. Getting the temperature controlled perfectly inside the refrigerator once more requires proper refrigerator repairs by qualified fridge repair techs.They will also fix ice maker, freezer and similar appliances.